Kits
300mAh 1S LiPO Ascent-32 (PH2.0)
- Product SKU: RER41730
- Category: Batteries, Electronics
- Order within
Redcat Ascent-32 1S LiPo Battery (3.7V/300mAh) w/PH2.0 Connector
RER41730
The Redcat Ascent-32 3.7V 300mAh LiPo Battery is a direct replacement power source designed for the Ascent-32 Rock Crawler. Compact and lightweight, it delivers reliable, consistent power for extended run times and optimal performance. Built with quality cells for safety and durability, this LiPo battery ensures your crawler stays powered and ready for every off-road adventure.
Features:
-
Direct replacement fit
-
Lightweight and compact design
-
Durable LiPo cell construction
-
Easy charging compatibility
IMPORTANT LITHIUM POLYMER SAFETY INFORMATION
-
DO NOT leave a battery in your model when charging
-
DO NOT leave lithium batteries unattended when charging
-
ALWAYS balance charge lithium battery
-
ALWAYS use a LiPo Safe charging bag/box
-
YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!)
-
YOU MUST not over discharge lithium battery packs
-
READ & UNDERSTAND the instructions carefully before operating this battery
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
Redcat Ascent-32 1S LiPo Battery (3.7V/300mAh) w/PH2.0 Connector
RER41730
The Redcat Ascent-32 3.7V 300mAh LiPo Battery is a direct replacement power source designed for the Ascent-32 Rock Crawler. Compact and lightweight, it delivers reliable, consistent power for extended run times and optimal performance. Built with quality cells for safety and durability, this LiPo battery ensures your crawler stays powered and ready for every off-road adventure.
Features:
-
Direct replacement fit
-
Lightweight and compact design
-
Durable LiPo cell construction
-
Easy charging compatibility
IMPORTANT LITHIUM POLYMER SAFETY INFORMATION
-
DO NOT leave a battery in your model when charging
-
DO NOT leave lithium batteries unattended when charging
-
ALWAYS balance charge lithium battery
-
ALWAYS use a LiPo Safe charging bag/box
-
YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!)
-
YOU MUST not over discharge lithium battery packs
-
READ & UNDERSTAND the instructions carefully before operating this battery
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
