Mini Rally VXL Ford RS200
![]()
Kits
Mini Rally VXL Ford RS200
108046-1
- 40+ mph with included 2-cell LiPo Battery
- 55+ mph with optional 3-Cell LiPo Battery (sold separately)
- Clipless Replica Ford RS200 Body
- Quick and easy installation and removal
- Reinforced side skirts
- Tough front splitter
- High-output LED light pods
- Molded scale air intakes and side mirrors
- VXL-3s™ Waterproof Electronic Speed Control
- Three programmable drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode™ - 50% forward / brake / 50% reverse
- Heat sink with installed cooling fan
- Traxxas EZ-Set® one-button setup
- Built-in two-stage low-voltage detection
- Velineon® 3500 Kv Brushless Motor
- Ultra high-temperature sintered neodymium magnets
- Low-maintenance design
- Precision-balanced rotor
- Efficient high-speed ball bearings
- Brilliant blue-anodized finish
- Battery and Charger Included
- High-capacity 2-cell LiPo battery
- 7.4 volts
- 3500 mAh capacity for extended run time
- 2-amp USB-C charger
- Traxxas iD® technology for faster, safer charging
- TQi™ 2.4 GHz High Output 2-Channel Radio System
- Programmable multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity
- Adjustable steering and throttle end points
- 5-channel micro receiver (6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug
- Traxxas Stability Management® (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on powerslides
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- 1/10 Scale AWD Driveline
- Full-time shaft-driven all-wheel drive
- 1/10 scale extreme-duty telescoping driveshafts
- Direct-drive (no transmission)
- Sealed center differential
- Large 32-pitch gears
- Sealed planetary steel-gear differentials (F&R)
- Fixed gear mesh system
- Modular Long-Wheelbase Chassis
- Long 262 mm wheelbase for added stability and scale proportions
- Modular interlocking front and rear bulkheads
- Driveline is sealed in the chassis to keep out dirt
- Absorbs and distributes impact energy
- Easy to service and access components
-
Easy Battery Access
- Battery is protected deep in the chassis
- Battery hold-down pivots for easy access
- More secure than conventional retention systems
-
Steering
- 1/10 scale 2075X waterproof high-torque, metal-gear servo
- Heavy-duty double-shear bellcranks
- Cam-operated servo saver
-
Suspension
- Heavy duty, double-shear suspension arms
- Dual wishbone design
- Extra tough outer suspension components
-
Oil-Filled Ultra Shocks™
- Full size 1/10 scale shocks
- Large oil capacity
- Easy to tune
-
Front Splitter and Skid Plates
- Reinforced front splitter absorbs impacts
- Rugged interlocking skid plates
- Smooth undertray eliminates snags
-
Wheels and Tires
- White rally car wheels
- New high-traction rally tires
- Aggressive tread blocks for exceptional grip
- Softer rear compound tires for balanced handling
- Hex Hardware with Rust-Resistant Black Oxide Coating
- Sealed Ball Bearings
MODEL MODEL 108046-1: Mini Rally VXL: mini-scale rally car with Ford RS200 clipless body, fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system with TSM®, and Velineon® VXL-3s™ brushless power system. Includes 2-cell LiPo battery and 2-amp USB-C charger.
What’s In The Box:
- Mini Rally VXL Ready-To-Race rally car
- Clipless replica Ford RS200 body
- Velineon VXL-3s brushless power system
- 3500 mAh 2-cell LiPo battery
- 2-amp USB-C charger
- Quick Start Guide
- TQi 2.4 GHz radio system
- Optional pinion gear
- High quality maintenance tools
What You’ll Need:
- AA Alkaline Batteries
Four AA alkaline batteries for the transmitter
- Charging Accessories
Power adapter 2912 and power cable 2916 recommended for peak charging performance
Mini Rally VXL Ford RS200
108046-1
- 40+ mph with included 2-cell LiPo Battery
- 55+ mph with optional 3-Cell LiPo Battery (sold separately)
- Clipless Replica Ford RS200 Body
- Quick and easy installation and removal
- Reinforced side skirts
- Tough front splitter
- High-output LED light pods
- Molded scale air intakes and side mirrors
- VXL-3s™ Waterproof Electronic Speed Control
- Three programmable drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode™ - 50% forward / brake / 50% reverse
- Heat sink with installed cooling fan
- Traxxas EZ-Set® one-button setup
- Built-in two-stage low-voltage detection
- Velineon® 3500 Kv Brushless Motor
- Ultra high-temperature sintered neodymium magnets
- Low-maintenance design
- Precision-balanced rotor
- Efficient high-speed ball bearings
- Brilliant blue-anodized finish
- Battery and Charger Included
- High-capacity 2-cell LiPo battery
- 7.4 volts
- 3500 mAh capacity for extended run time
- 2-amp USB-C charger
- Traxxas iD® technology for faster, safer charging
- TQi™ 2.4 GHz High Output 2-Channel Radio System
- Programmable multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity
- Adjustable steering and throttle end points
- 5-channel micro receiver (6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug
- Traxxas Stability Management® (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on powerslides
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- 1/10 Scale AWD Driveline
- Full-time shaft-driven all-wheel drive
- 1/10 scale extreme-duty telescoping driveshafts
- Direct-drive (no transmission)
- Sealed center differential
- Large 32-pitch gears
- Sealed planetary steel-gear differentials (F&R)
- Fixed gear mesh system
- Modular Long-Wheelbase Chassis
- Long 262 mm wheelbase for added stability and scale proportions
- Modular interlocking front and rear bulkheads
- Driveline is sealed in the chassis to keep out dirt
- Absorbs and distributes impact energy
- Easy to service and access components
-
Easy Battery Access
- Battery is protected deep in the chassis
- Battery hold-down pivots for easy access
- More secure than conventional retention systems
-
Steering
- 1/10 scale 2075X waterproof high-torque, metal-gear servo
- Heavy-duty double-shear bellcranks
- Cam-operated servo saver
-
Suspension
- Heavy duty, double-shear suspension arms
- Dual wishbone design
- Extra tough outer suspension components
-
Oil-Filled Ultra Shocks™
- Full size 1/10 scale shocks
- Large oil capacity
- Easy to tune
-
Front Splitter and Skid Plates
- Reinforced front splitter absorbs impacts
- Rugged interlocking skid plates
- Smooth undertray eliminates snags
-
Wheels and Tires
- White rally car wheels
- New high-traction rally tires
- Aggressive tread blocks for exceptional grip
- Softer rear compound tires for balanced handling
- Hex Hardware with Rust-Resistant Black Oxide Coating
- Sealed Ball Bearings
What’s In The Box:
- Mini Rally VXL Ready-To-Race rally car
- Clipless replica Ford RS200 body
- Velineon VXL-3s brushless power system
- 3500 mAh 2-cell LiPo battery
- 2-amp USB-C charger
- Quick Start Guide
- TQi 2.4 GHz radio system
- Optional pinion gear
- High quality maintenance tools
What You’ll Need:
- AA Alkaline Batteries
Four AA alkaline batteries for the transmitter
- Charging Accessories
Power adapter 2912 and power cable 2916 recommended for peak charging performance
