32P Steel Spur Gear 0.8M (53T)
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
Kits

32P Steel Spur Gear 0.8M (53T)

Available: Out of Stock
$23.88
Successful pre-order.Thanks for contacting us!

Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T)

SJT253

This is the Hot Racing Steel 32 Pitch, 53 Tooth Spur Gear with grey hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.

Features:

  • CNC machined and lightened hardened steel construction

  • Black oxide coating for durability and corrosion resistance

  • Grey-colored countersunk washers

Specifications:
Number of Teeth: 
53
Gear Pitch: 
32 pitch (0.8 module)
Mounting Holes: 
3
Tooth Face width: 
6mm (0.24 inch)
Internal diameter: 
~11mm (~0.43 inch)

Includes:

  • 54 tooth 32 pitch spur gear

  • (3) mounting screws

  • (3) grey-colored countersunk washers

  • (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)

Requires:

  • Hardened clutch bell or pinon gear

  • Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.

Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T)

SJT253

This is the Hot Racing Steel 32 Pitch, 53 Tooth Spur Gear with grey hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.

Features:

  • CNC machined and lightened hardened steel construction

  • Black oxide coating for durability and corrosion resistance

  • Grey-colored countersunk washers

Specifications:
Number of Teeth: 
53
Gear Pitch: 
32 pitch (0.8 module)
Mounting Holes: 
3
Tooth Face width: 
6mm (0.24 inch)
Internal diameter: 
~11mm (~0.43 inch)

Includes:

  • 54 tooth 32 pitch spur gear

  • (3) mounting screws

  • (3) grey-colored countersunk washers

  • (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)

Requires:

  • Hardened clutch bell or pinon gear

  • Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.